CostKit

Siding Cost · South Carolina

Siding Cost in South Carolina (2026)

Siding in South Carolina typically runs $8,900–$18,700 for a typical 2,000 sq ft single-family home (approximately 2,000 sq ft of exterior wall surface). That works out to roughly $4.43–$9.36 per sq ft installed.

Residential home exterior showing horizontal lap siding patterns

South Carolina context that moves siding replacement cost

Climate: Subtropical with hot, humid summers and mild winters. Hurricane risk along the coast. High humidity requires moisture management.

Labor market: Below national average.

Permits & codes: South Carolina follows the IRC with state amendments. Coastal counties have enhanced wind-resistance requirements. The state adopted statewide building codes in 2008. Charleston has additional historic district and flood zone requirements.

About siding replacement in South Carolina

Vinyl siding is the most common residential exterior in the US — about 30% of homes — because it's the cheapest durable option that doesn't require finish painting. A full replacement on a typical 2,000 sq ft home runs $9,000 to $19,000 nationally in 2026.

Fiber cement (Hardie board) is the next most common, costing 1.5–2× vinyl but offering a more upscale appearance and 50-year warranty. Wood, engineered wood (LP SmartSide), brick veneer, and stucco fill out the remaining options. Material choice and code requirements interact to drive the per-state spread.

What moves the price

Tear-off vs new construction

Replacing existing siding adds $1.50–$3.00/sq ft for removal and disposal. On a 2,000 sq ft house that's $3,000–$6,000 just to take the old material off. New construction over fresh sheathing is at the low end of the state range.

Insulated (foam-backed) vinyl

Standard vinyl runs $3–$5/sq ft material. Foam-backed insulated vinyl is $5–$8/sq ft and adds R-2 to R-4 of continuous insulation. Required in some Northeast and Northwest jurisdictions to meet energy code on replacement projects.

House wrap and trim

Code requires a weather-resistive barrier behind new siding. Tyvek HomeWrap or equivalent is $0.30–$0.60/sq ft. New aluminum or PVC trim around windows, doors, and corners adds $1,500–$3,500. Don't skip it — water intrusion at trim is the most common siding-related insurance claim.

Hurricane and wind zones

Florida, Gulf Coast, and Atlantic states require tighter nailing schedules (every 8" on center vs 16") and sometimes ring-shank or hurricane-rated nails. Some coastal counties require fiber cement or Hardie board instead of vinyl. Add 15–30% to your base cost in HVHZ and high-wind regions.

Profile and color choice

Most vinyl is double-4 or double-5 horizontal lap. Premium profiles (dutch lap, board-and-batten, scallop) add 15–35% in material. Darker colors (deep blue, charcoal, forest green) cost 10–20% more than light tans and whites because of color stabilizers.

Two-story vs single-story

A 2-story home of the same square footage as a single-story has roughly 1.4× the exterior wall area. Two-story labor is also higher because of scaffolding requirements — figure $1,500–$3,500 extra on a typical 2-story job vs the same footprint single-story.

Siding cost across South Carolina metros

Within South Carolina the spread between metros is usually 25–40% of the state midpoint. Major metros pay more than rural areas because of labor demand, permit complexity, and material delivery overhead.

  • Charleston — typical home build $150–$340/sq ft range
  • Greenville — typical home build $125–$285/sq ft range
  • Columbia — typical home build $115–$265/sq ft range
  • Myrtle Beach — typical home build $130–$300/sq ft range
  • Hilton Head — typical home build $170–$380/sq ft range

Frequently asked questions

How much does siding replacement cost in South Carolina?
A vinyl siding replacement on a typical 2,000 sq ft South Carolina home runs $8,900–$18,700 — roughly $4.43–$9.36 per sq ft installed. Upgrading to fiber cement runs 1.5–2× that range. The state range adjusts for South Carolina labor rates and any wind-zone code premium that applies.
How long does vinyl siding last in South Carolina?
25–40 years typically, depending on UV exposure and climate. South Carolina's climate (Subtropical with hot, humid summers and mild winters) affects this — hot southern climates degrade vinyl faster than mild northern ones. Premium thicker (.044"+) siding lasts longer than entry-level (.040"). Manufacturer warranties run 30–50 years; in practice expect fading and minor warping starting around year 25–30.
Vinyl vs fiber cement in South Carolina — which is better value?
Vinyl: cheaper, zero maintenance, decent durability, but looks plastic up close. Fiber cement: looks like real wood, paintable, fire-resistant, 50-year warranty, but needs repainting every 10–15 years. For South Carolina's resale market, fiber cement returns better in higher-end neighborhoods; vinyl is competitive in mid-tier markets.
Can I install vinyl siding myself in South Carolina?
Technically yes for a single-story rambler with no complex details. Realistically: not unless you have framing experience. The challenge isn't nailing panels — it's the J-channel, drip cap, kick-out flashing, and water management at every penetration. Bad install causes 5-figure water damage. The $4,000–$8,000 labor savings rarely justify the risk for non-pros.
Should I insulate the wall when re-siding?
Tear-off is the cheapest time to add continuous exterior insulation. Adding 1" of XPS foam between sheathing and new siding adds $1.50–$2.50/sq ft and bumps wall R-value by R-5. For older South Carolina homes (pre-1980) with R-11 batts, that's a significant improvement. For newer homes already at R-19+, the ROI is weaker.

Get a South Carolina-specific siding replacement estimate

CostKit's AI pulls South Carolina labor rates, regional material prices, and code-driven requirements automatically. Generate a free phase-by-phase estimate in under 60 seconds.

Generate a free estimate →

Related

See the full 50-state siding replacement cost comparison to see how South Carolina stacks up nationally.

For broader benchmarks across South Carolina, see the cost to build a house in South Carolina.

Other trade costs for South Carolina: