CostKit

Siding Cost · Maine

Siding Cost in Maine (2026)

Siding in Maine typically runs $12,400–$26,200 for a typical 2,000 sq ft single-family home (approximately 2,000 sq ft of exterior wall surface). That works out to roughly $6.21–$13.12 per sq ft installed.

Residential home exterior showing horizontal lap siding patterns

Maine context that moves siding replacement cost

Climate: Cold New England climate with heavy snowfall, long winters, and short building season. Coastal areas face nor'easters and salt exposure.

Labor market: Near national average.

Permits & codes: Maine follows the Maine Uniform Building and Energy Code (MUBEC) based on the IRC. Not all municipalities have adopted the code — smaller towns may have limited enforcement. Coastal areas have flood zone and setback requirements.

About siding replacement in Maine

Vinyl siding is the most common residential exterior in the US — about 30% of homes — because it's the cheapest durable option that doesn't require finish painting. A full replacement on a typical 2,000 sq ft home runs $9,000 to $19,000 nationally in 2026.

Fiber cement (Hardie board) is the next most common, costing 1.5–2× vinyl but offering a more upscale appearance and 50-year warranty. Wood, engineered wood (LP SmartSide), brick veneer, and stucco fill out the remaining options. Material choice and code requirements interact to drive the per-state spread.

What moves the price

Tear-off vs new construction

Replacing existing siding adds $1.50–$3.00/sq ft for removal and disposal. On a 2,000 sq ft house that's $3,000–$6,000 just to take the old material off. New construction over fresh sheathing is at the low end of the state range.

Insulated (foam-backed) vinyl

Standard vinyl runs $3–$5/sq ft material. Foam-backed insulated vinyl is $5–$8/sq ft and adds R-2 to R-4 of continuous insulation. Required in some Northeast and Northwest jurisdictions to meet energy code on replacement projects.

House wrap and trim

Code requires a weather-resistive barrier behind new siding. Tyvek HomeWrap or equivalent is $0.30–$0.60/sq ft. New aluminum or PVC trim around windows, doors, and corners adds $1,500–$3,500. Don't skip it — water intrusion at trim is the most common siding-related insurance claim.

Hurricane and wind zones

Florida, Gulf Coast, and Atlantic states require tighter nailing schedules (every 8" on center vs 16") and sometimes ring-shank or hurricane-rated nails. Some coastal counties require fiber cement or Hardie board instead of vinyl. Add 15–30% to your base cost in HVHZ and high-wind regions.

Profile and color choice

Most vinyl is double-4 or double-5 horizontal lap. Premium profiles (dutch lap, board-and-batten, scallop) add 15–35% in material. Darker colors (deep blue, charcoal, forest green) cost 10–20% more than light tans and whites because of color stabilizers.

Two-story vs single-story

A 2-story home of the same square footage as a single-story has roughly 1.4× the exterior wall area. Two-story labor is also higher because of scaffolding requirements — figure $1,500–$3,500 extra on a typical 2-story job vs the same footprint single-story.

Siding cost across Maine metros

Within Maine the spread between metros is usually 25–40% of the state midpoint. Major metros pay more than rural areas because of labor demand, permit complexity, and material delivery overhead.

  • Portland — typical home build $180–$410/sq ft range
  • Bangor — typical home build $150–$340/sq ft range
  • Kennebunkport / York County — typical home build $200–$460/sq ft range
  • Augusta — typical home build $145–$330/sq ft range

Frequently asked questions

How much does siding replacement cost in Maine?
A vinyl siding replacement on a typical 2,000 sq ft Maine home runs $12,400–$26,200 — roughly $6.21–$13.12 per sq ft installed. Upgrading to fiber cement runs 1.5–2× that range. The state range adjusts for Maine labor rates and any wind-zone code premium that applies.
How long does vinyl siding last in Maine?
25–40 years typically, depending on UV exposure and climate. Maine's climate (Cold New England climate with heavy snowfall, long winters, and short building season) affects this — hot southern climates degrade vinyl faster than mild northern ones. Premium thicker (.044"+) siding lasts longer than entry-level (.040"). Manufacturer warranties run 30–50 years; in practice expect fading and minor warping starting around year 25–30.
Vinyl vs fiber cement in Maine — which is better value?
Vinyl: cheaper, zero maintenance, decent durability, but looks plastic up close. Fiber cement: looks like real wood, paintable, fire-resistant, 50-year warranty, but needs repainting every 10–15 years. For Maine's resale market, fiber cement returns better in higher-end neighborhoods; vinyl is competitive in mid-tier markets.
Can I install vinyl siding myself in Maine?
Technically yes for a single-story rambler with no complex details. Realistically: not unless you have framing experience. The challenge isn't nailing panels — it's the J-channel, drip cap, kick-out flashing, and water management at every penetration. Bad install causes 5-figure water damage. The $4,000–$8,000 labor savings rarely justify the risk for non-pros.
Should I insulate the wall when re-siding?
Tear-off is the cheapest time to add continuous exterior insulation. Adding 1" of XPS foam between sheathing and new siding adds $1.50–$2.50/sq ft and bumps wall R-value by R-5. For older Maine homes (pre-1980) with R-11 batts, that's a significant improvement. For newer homes already at R-19+, the ROI is weaker.

Get a Maine-specific siding replacement estimate

CostKit's AI pulls Maine labor rates, regional material prices, and code-driven requirements automatically. Generate a free phase-by-phase estimate in under 60 seconds.

Generate a free estimate →

Related

See the full 50-state siding replacement cost comparison to see how Maine stacks up nationally.

For broader benchmarks across Maine, see the cost to build a house in Maine.

Other trade costs for Maine: