CostKit

Concrete Slab Cost · Wyoming

Concrete Slab Cost in Wyoming (2026)

Concrete Slab in Wyoming typically runs $8,100–$18,900 for a typical 1,200 sq ft footprint (excavation, gravel base, vapor barrier, rebar, formwork, 4-inch pour, finish). That works out to roughly $6.90–$14.85 per sq ft installed.

Concrete slab foundation pour showing rebar grid and form boards

Wyoming context that moves a concrete slab foundation cost

Climate: Cold continental with harsh winters, high winds, and extreme temperature swings. Mountain areas have heavy snowfall and short building season.

Labor market: Near national average.

Permits & codes: Wyoming has limited statewide building code requirements. Cities and counties adopt codes locally — Cheyenne and Casper follow the IRC, while many rural areas have minimal requirements. Teton County (Jackson Hole) has strict architectural and environmental review processes.

About a concrete slab foundation in Wyoming

A concrete slab-on-grade is the cheapest residential foundation. For a typical 1,200 sq ft house footprint, budget $6,000 to $15,000 with a national midpoint around $8/sq ft installed. The job takes 5–10 days end-to-end including cure time.

Slabs are the southern foundation default — Florida, Texas, Arizona, and the Gulf Coast use them almost universally because the frost line is shallow and the soil works well. In the Northeast and Midwest, slabs are common for accessory buildings (garages, sheds, additions) but full basements still dominate primary home foundations.

What moves the price

Frost line depth

A slab in Florida sits on 4–6 inches of compacted gravel and a thickened perimeter footing 18 inches deep. The same scope in Minnesota needs footings 48–60 inches deep to get below frost, which doubles the excavation and concrete in the perimeter alone. The biggest single regional cost driver.

Concrete strength and thickness

Residential standard is 3,000–4,000 psi, 4 inches thick. Garage slabs and shop floors go 5 inches at 4,000+ psi. Seismic zones (Pacific states) often require 6 inches at 4,500 psi with additional rebar. Each inch of thickness adds about $1.50/sq ft.

Vapor barrier and insulation

Code now requires a 10-mil polyethylene vapor barrier under the slab. Many cold-climate jurisdictions also require R-10 rigid foam under the perimeter or full slab. Sub-slab foam adds $1.50–$3.50/sq ft.

Finishing tier

Broom finish (rough): included in base price. Smooth troweled finish for exposed floors: $1–$2/sq ft. Stained or polished concrete: $4–$10/sq ft additional. Decorative stamped concrete: $12–$25/sq ft additional.

Site conditions

A flat, accessible lot with truck access within 50 feet of the pour is the base price. Add $1,500–$5,000 for sites with significant slope, rock, or required pumping of concrete over 100+ feet. Coastal flood zones may require elevated slab on piers, which doubles the cost.

Post-tension cabling

Required in expansive-soil areas (north and central Texas, Oklahoma, parts of Colorado and Wyoming) because it lets the slab flex without cracking as soil moves. Adds 20–35% to the slab cost but is non-negotiable in expansive-clay regions.

Concrete Slab cost across Wyoming metros

Within Wyoming the spread between metros is usually 25–40% of the state midpoint. Major metros pay more than rural areas because of labor demand, permit complexity, and material delivery overhead.

  • Cheyenne — typical home build $155–$350/sq ft range
  • Casper — typical home build $145–$330/sq ft range
  • Jackson Hole — typical home build $350–$800/sq ft range
  • Laramie — typical home build $145–$325/sq ft range

Frequently asked questions

How much does a concrete slab cost in Wyoming?
A typical 1,200 sq ft slab foundation in Wyoming runs $8,100–$18,900 — about $6.90–$14.85 per sq ft installed. Includes excavation, gravel base, vapor barrier, rebar, formwork, the pour, and a broom finish.
Slab vs crawlspace vs basement in Wyoming?
Slab-on-grade is cheapest in warm climates. In Wyoming's climate (Cold continental with harsh winters, high winds, and extreme temperature swings), the frost line and soil type determine whether a slab is even practical. In cold climates where deep footings are required anyway, crawlspace becomes cost-competitive with slab; basements are more expensive but recover floor area.
How long does a slab pour take in Wyoming?
From excavation to finished slab: 5–10 days for a typical 1,200 sq ft footprint. Excavation 1 day, gravel and prep 1–2 days, formwork and rebar 1–2 days, pour and finish 1 day, cure 3–7 days before framing can start. Cold-weather pours in Wyoming need extra cure time or admixtures.
Can a slab be poured in Wyoming's winter?
Yes, with calcium chloride or non-chloride accelerators added to the mix ($25–$60 per yard premium) and insulating blankets covering the slab while it cures. Below 25°F, the cost can climb 15–25% above warm-weather work. Wyoming's climate (specifically Cold continental with harsh winters, high winds, and extreme temperature swings) affects whether winter pours are routine or unusual.
Do I need a permit for a concrete slab in Wyoming?
Yes for any structural foundation supporting a habitable building. Permits run $200–$700 in most Wyoming jurisdictions. Slabs for sheds, patios, or driveways often don't require permits but check with your local building department first. Larger residential and any commercial pours always require permits and inspection.

Get a Wyoming-specific a concrete slab foundation estimate

CostKit's AI pulls Wyoming labor rates, regional material prices, and code-driven requirements automatically. Generate a free phase-by-phase estimate in under 60 seconds.

Generate a free estimate →

Related

See the full 50-state a concrete slab foundation cost comparison to see how Wyoming stacks up nationally.

For broader benchmarks across Wyoming, see the cost to build a house in Wyoming.

Other trade costs for Wyoming: