CostKit

Roofing Cost · Texas

Roofing Cost in Texas (2026)

Roofing in Texas typically runs $8,900–$19,700 for a typical 1,800–2,200 sq ft roof replacement (asphalt shingles, tear-off included). That works out to roughly $4.45–$10.45 per square foot.

Residential pitched asphalt shingle roof with chimney and gutter

Texas context that moves roofing cost

Climate: Varies from humid subtropical (east) to semi-arid (west) to desert (far west). Hurricane risk on the Gulf Coast. Extreme heat in summer. Expansive clay soils across much of the state.

Labor market: Near national average.

Permits & codes: Texas does not have a mandatory statewide residential building code — adoption is local. Most cities and counties have adopted the IRC. Houston is notably the largest U.S. city without zoning laws. Gulf Coast communities have enhanced wind-resistance requirements post-Hurricane Harvey.

About roofing in Texas

A residential roof replacement covers tear-off of the existing roofing, inspection and repair of the decking, new underlayment, drip edge, flashing, vents, and shingle installation. For a typical 2,000 square foot home with a moderate pitch, that's a one-week job for an established crew.

Asphalt shingles are still the dominant residential roofing material in the US — about 80% of replacements. Tile is common in the Southwest and on Spanish-style homes; metal roofing is growing in mountain and coastal regions; cedar shake is niche. Material choice can swing the total cost 2-3× even before you account for regional labor differences.

What moves the price

Material choice

3-tab asphalt: $90–$130 per square (100 sq ft). Architectural / dimensional asphalt: $130–$200 per square. Metal standing-seam: $400–$900 per square. Clay or concrete tile: $400–$1,200 per square. Cedar shake: $400–$700 per square. The material is usually 35–50% of the total job cost; the rest is labor, tear-off, and accessories.

Roof complexity

A simple gable roof is the cheapest installation. Hip roofs add 10–15%. Multiple dormers, valleys, skylights, and chimneys add labor at every penetration. A complex roof can cost 30–60% more per square than a simple one of the same area.

Tear-off vs overlay

Most jurisdictions allow only one shingle layer; if your existing roof already has two, you must tear off. Tear-off adds $1.50–$3.50 per square foot in labor plus $400–$900 in disposal fees. Some areas now require tear-off regardless because layered roofs hide damage and complicate insurance inspections.

Decking repair

Once the old roof is off, you may find soft or rotted sheathing — typically 5–15% of the deck needs replacement on a 20+ year roof. Budget $70–$120 per 4x8 sheet of OSB or plywood installed. On bigger replacements (1,500+ sqft) you'll often hit $500–$2,000 in deck repair you didn't see in the original bid.

Permit and disposal fees

Permits run $150–$700 depending on jurisdiction. Disposal of 20+ year asphalt is typically by the cubic yard at a transfer station — $400–$1,000 for a 2,000 sq ft tear-off. Some states charge tipping fees on top.

Wind, snow, and impact ratings

Code-required wind ratings vary by climate zone. Coastal hurricane zones require 120–150 mph rated shingles installed with a tighter nailing pattern (6 nails per shingle vs 4). Hail-prone regions in the Midwest and Plains often install Class 4 impact-rated shingles that earn an insurance discount; these run 15–25% more in material.

Roofing cost across Texas metros

Within Texas the spread between metros is usually 25–40% of the state midpoint. Major metros pay more than rural areas because of labor demand, permit complexity, and material delivery overhead.

  • Austin — typical home build $155–$350/sq ft range
  • Dallas / Fort Worth — typical home build $140–$320/sq ft range
  • Houston — typical home build $130–$300/sq ft range
  • San Antonio — typical home build $125–$285/sq ft range
  • El Paso — typical home build $120–$270/sq ft range

Frequently asked questions

How much does a roof replacement cost in Texas?
A typical asphalt shingle roof replacement in Texas runs $8,900–$19,700 for a 1,800–2,200 sq ft home with standard architectural shingles, tear-off included. That's roughly $4.45–$10.45 per square foot installed. Upgrading to metal or tile doubles or triples that range.
What does the Texas cost include?
The $8,900–$19,700 range covers labor, materials, tear-off and disposal of one existing layer, new underlayment, drip edge, flashing, and ridge venting. It does not include decking repair (if needed), skylight replacement, gutter work, or solar panel removal and reinstall.
Why is roofing more expensive in some Texas metros than others?
Within Texas, the spread is driven by local labor availability, permit complexity, and disposal fees. Major metros pay 15–35% more than rural counties for the same scope. Coastal and hurricane-prone areas in Texas add a wind-rating premium of 8–15% on top of metro-level pricing.
When should I replace vs repair my Texas roof?
If the roof is under 12–15 years old and the damage is localized (a few missing shingles, one leak, isolated flashing), repair. If it is 18+ years old, has multiple leaks, or shows widespread granule loss, replacement is more cost-effective than ongoing repairs. Texas's climate accelerates aging in some cases — sun-baked southern asphalt typically gives 18–22 years versus 25–28 in mild northern climates.
Should I file an insurance claim for storm damage in Texas?
If the damage looks weather-related and your deductible is reasonable relative to the replacement cost, yes. Get a contractor inspection and photo documentation before calling the adjuster. Many Texas insurers have specific rules around the age of the roof (full ACV vs depreciated payout) so verify your policy. Some states have public adjuster regulations that affect how the claim is handled.

Get a Texas-specific roofing estimate

CostKit's AI pulls Texas labor rates, regional material prices, and code-driven requirements automatically. Generate a free phase-by-phase estimate in under 60 seconds.

Generate a free estimate →

Related

See the full 50-state roofing cost comparison to see how Texas stacks up nationally.

For broader benchmarks across Texas, see the cost to build a house in Texas.

Other trade costs for Texas: