Kitchen Remodel Cost · Georgia
Kitchen Remodel Cost in Georgia (2026)
Kitchen Remodel in Georgia typically runs $26K–$70K for a mid-range remodel (~200 sq ft kitchen, semi-custom cabinets, quartz counters, mid-tier appliances, no structural changes).
Georgia context that moves a kitchen remodel cost
Climate: Humid subtropical with hot summers and mild winters. Coastal areas face hurricane risk. Red clay soils in northern Georgia affect foundation work.
Labor market: Below national average.
Permits & codes: Georgia follows the IRC with state amendments. The state adopted mandatory statewide building codes in 2015. Coastal counties (Chatham, Glynn, etc.) have enhanced wind-resistance requirements. Georgia's energy code requires homes meet the International Energy Conservation Code (IECC).
About a kitchen remodel in Georgia
A mid-range kitchen remodel covers new cabinets, countertops, appliances, sink and faucet, backsplash, flooring, and updated lighting. It does not include moving walls or relocating major plumbing/electrical — those changes push the project into custom-remodel territory at 2–3× the cost.
Cabinets and labor drive 55–65% of the total. Both vary heavily by region — semi-custom cabinets ship from a handful of manufacturers with 12–16 week lead times in hot markets, and finish carpentry and tile labor are among the most regionally sensitive trades in the country.
What moves the price
Cabinet tier
The single biggest cost lever. Stock cabinets (Home Depot/Lowe's, IKEA, RTA): $4,000–$10,000 for a typical kitchen. Semi-custom (KraftMaid, Diamond, Schrock): $10,000–$22,000. Full custom from a local cabinet shop: $25,000–$60,000+. Within each tier, door style, finish, soft-close hardware, and pull-out organizers each add cost.
Countertop material
Laminate: $25–$45/sq ft installed. Quartz: $55–$95. Granite: $50–$110. Natural marble (Calacatta, Statuario): $90–$250+ for exotic slabs. For a 50-sq-ft kitchen, that's a $1,500–$12,000 spread on one line item. Quartz has become the default mid-range choice — stain resistance is significantly better than marble or wood.
Layout changes
Moving the sink adds $1,500–$3,000 in plumbing. Moving the range adds $500–$1,500 in gas/electrical. Removing a wall (load-bearing or not) is the single highest-impact change — engineering, beam install, and re-finishing add $4,000–$15,000. Open-plan conversions are the most common reason a remodel exceeds budget.
Appliance tier
Builder-grade package (Whirlpool, GE Basic, Frigidaire): $3,000–$5,000. Mid-tier (Bosch, KitchenAid, Samsung Premium, LG Premium): $6,000–$12,000. Pro-grade (Sub-Zero, Wolf, Thermador, Miele): $20,000–$50,000+. Appliances are the easiest line to flex up or down without affecting the rest of the project.
Flooring
Refinishing existing hardwood: $4–$8/sq ft. New LVP (luxury vinyl plank): $5–$10/sq ft installed. New engineered hardwood: $9–$15. New porcelain tile: $10–$25. Tile is the most labor-intensive — figure $400–$1,200 of additional labor over LVP for the same square footage.
Permit and structural review
Permits run $300–$1,500 depending on jurisdiction. Any wall removal needs structural engineer review ($400–$1,500) and inspection. Some jurisdictions require updated electrical service if the panel doesn't meet current code. Plan 2–6 weeks for permit approval depending on the city.
Kitchen Remodel cost across Georgia metros
Within Georgia the spread between metros is usually 25–40% of the state midpoint. Major metros pay more than rural areas because of labor demand, permit complexity, and material delivery overhead.
- Atlanta — typical home build $145–$340/sq ft range
- Savannah — typical home build $130–$300/sq ft range
- Augusta — typical home build $110–$260/sq ft range
- Athens — typical home build $120–$280/sq ft range
Frequently asked questions
How much does a kitchen remodel cost in Georgia?
What is the ROI on a kitchen remodel in Georgia?
How long does a kitchen remodel take in Georgia?
Should I move the sink or range?
Do I need a permit to remodel my kitchen in Georgia?
Get a Georgia-specific a kitchen remodel estimate
CostKit's AI pulls Georgia labor rates, regional material prices, and code-driven requirements automatically. Generate a free phase-by-phase estimate in under 60 seconds.
Generate a free estimate →Related
See the full 50-state a kitchen remodel cost comparison to see how Georgia stacks up nationally.
For broader benchmarks across Georgia, see the cost to build a house in Georgia.
Other trade costs for Georgia:
